Product Code : 101
Brand Name : MOLYGRAPH
1. FOOD GRADE GREASE :Applications within the food & drug industry have strict requirements specifically pertaining to lubricants. Our lubricants are completely compatible with food processing machinery and materials.NSF H-1 approved.
2 .EP Greases
High quality lithium based greases formulated with highly refined base oils and fortified with synergistic EP and Anti-Wear Additives. These greases give excellent performance under medium to heavy loads.
These greases are specifically designed for plant wide lubrication, with an NLGI range extending from NLGI-2 to NLGI-000.
3. HIGH TEMP GREASE :
These products are used where temperature is the main criteria. Special gellents and careful selection of base oils make these greases an optimal choice for a variety of high temperature applications.Lithium-Calcium & Calcium Sulphonate thickened greases with optimized EP-Antiwear additive package give unsurpassed resistance to water wash out.
Various factors such as loads, bearing speeds, relubrication intervals, atmospheric conditions and temperature stability come into play while selecting a high temperature grease.
4.WATER RESISTANT GREASE :
They are mainly required where there is high contact with water or coolants which causes the grease to wash out resulting in insufficient lubrication.
5. CHAIN & WIRE ROPE GREASE :Lubrication of wire ropes, chains and cables is necessary to increase their operational effectiveness. Cranes, elevators, drilling rigs are just some of the areas where wire ropes and cables are extensively used.
The greases are available in different consistencies to cater to wider operating parameters.
6.ANTI-SEIZE PASTE : Anti-Seizes are high quality lubricants that are usually supplied in the form of a paste. They contain a number of solid lubricants including Molybdenum Di-sulfide, graphite, metal hydroxides, metal phosphates, inorganic oxides as well as metals such as copper, tin & zinc. They are specifically formulated for easy application and high adhesion.All metal surfaces are covered by their oxides in order to protect them from seizure and wear during sliding and rolling operations. In case the oxide layer is damaged during sliding or the oxide layer is extremely thin like that for stainless steel the danger of seizure is very high. In order to protect these metal surfaces, they are coated with solid lubricants. The film has very good adhesion to the metal substrate and very good film strength. Such a film prevents metal to metal contact and thereby prevent wear and seizure.
7.Open Gear Grease :
Extremely tacky and viscous greases used for the lubrication of Open Gears.
These greases are formulated with special additives and solid lubricants which results in a low co-efficient of friction. The tackiness of the grease helps it to stick to the meshing in the gear tooth surfaces, reduces friction and prolongs the life of the gears.